Surface Mount 64 Pin Memory IC 8 kb kb 10mm mm 115mA mA 8b b
SOT-23
71V30L35TF8 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
7 Weeks
Mount
Surface Mount
Package / Case
LQFP
Number of Pins
64
Published
2009
JESD-609 Code
e0
Pbfree Code
no
Part Status
Active
Moisture Sensitivity Level (MSL)
3 (168 Hours)
Number of Terminations
64
ECCN Code
EAR99
Terminal Finish
Tin/Lead (Sn85Pb15)
Max Operating Temperature
70°C
Min Operating Temperature
0°C
Additional Feature
BATTERY BACKUP OPERATION
Terminal Position
QUAD
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
240
Number of Functions
1
Supply Voltage
3.3V
Terminal Pitch
0.5mm
Time@Peak Reflow Temperature-Max (s)
20
Pin Count
64
Operating Supply Voltage
3.3V
Temperature Grade
COMMERCIAL
Interface
Parallel
Max Supply Voltage
3.6V
Min Supply Voltage
3V
Memory Size
1kB
Number of Ports
2
Nominal Supply Current
115mA
Memory Type
RAM, SDR, SRAM
Access Time
35 ns
Organization
1KX8
Output Characteristics
3-STATE
Address Bus Width
20b
Density
8 kb
Standby Current-Max
0.003A
I/O Type
COMMON
Sync/Async
Asynchronous
Word Size
8b
Standby Voltage-Min
3V
Length
10mm
Height Seated (Max)
1.6mm
Width
10mm
Thickness
1.4mm
Radiation Hardening
No
RoHS Status
RoHS Compliant
Lead Free
Contains Lead
71V30L35TF8 Product Details
71V30L35TF8 Overview
As far as its memory type goes, it falls into the RAM, SDR, SRAM category. LQFP case encloses it. There is 1kB of memory on the chip. There are 64 terminations on the chip. There are 1 functions supported by this part as part of the comprehensive working process. The memory device is designed to be supplied with an 3.3V volt power supply in order to operate properly. In this ic memory chip, there is an 64-pin package that encloses the device. It is worth noting that this memory device has 64 pins, which indicates it has 64 memory locations. This memory chip has an operating supply voltage of 3.3V. As a result of the Surface Mount mounting configuration, this chip is designed to be straightforward, high-efficiency, and easy to install. As far as the nominal supply current of this memory component is concerned, it is rated at 115mA. Despite all its benefits, this memory chip also offers BATTERY BACKUP OPERATION for improved system performance. Using 2 ports, a single memory address can be read and/or written. A memory map of COMMON bits has been added to the I/O port addresses of this device. Memory ics must operate at a temperature of at least 0°C. Temperatures over 70°C°C are not recommended. If this part is to be used, the minimum supply voltage should not be less than 3V volts. The operating voltage of the memory ics shall not exceed 3.6V.