LTC3727EG#PBF Overview

With its 28-SSOP (0.209, 5.30mm Width) package, the switching controller fits the needs of most applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. There is a Tube solid enclosure around the pmic. The program can handle Transistor Driver dc switching's outputs (s). A 4V~30V voltage is supplied to the dc control and used for operating it. Qualified to work in a -40°C~85°C TA dc switcher. The switching controller is capable of switching at the 255kHz~530kHz position. As it has a Surface Mount value, it can be used for general dc dc regulator. The dcdc regulator features Enable, Power Good, Soft Start for efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . The 28 terminations can be used for a wide range of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis set to 15V. You can find other relevant dc to dc converter ics by searching "LTC3727". In particular, switching converter is a type of Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 4V. Considering the dc to dc regulator can only accept 36V input voltage, it is important to take note of this. Switching converter outputs current to the greatest value of 3A.

LTC3727EG#PBF Features

Transistor Driver Outputs
Switching Frequency: 255kHz~530kHz
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION

LTC3727EG#PBF Applications

There are a lot of Linear Technology/Analog Devices LTC3727EG#PBF DC to DC converter applications.

• Electrical distribution systems
• Alternators
• Textile machinery
• Gear/thread machining machines
• Nuclear power plants
• Packaging
• Remotely powered electric motors
• Electric water heaters
• Computer monitoring equipment of building
• Shearing machines