REF02HJ8 Overview
8-CDIP (0.300, 7.62mm) is used to simplify the process.A Tube external package encloses the voltage reference ic.Different functions are terminated with 8.IC THREE TERMINAL VOLTAGE REFERENCE is coupled with the reference voltage.Test statistics determine the output voltage 5V.Having 1 outputs is sufficient.The voltage reference ic has 8 pins.During reflow soldering, the temperature shouldn't rise above NOT SPECIFIED.For PCB designs with high demands, Through Hole is available.REF02 can be used to find other relevant parts.0 volts is the required supply voltage.There is a minimum voltage requirement of 8V.It is tested at 5.025V to see what voltage is produced by the voltage reference circuit.There is 4.975V less than 4.975V voltage output from this voltage reference ic.As far as inaccuracy is concerned, the voltage reference ic holds a maximum value of 0.5%.The purpose will be better fulfilled if it has OUTPUT VOLTAGE CAN BE ADJUSTED OVER A +/-3 PERCENT RANGE.Temperatures at ambient are as low as 70°C.
REF02HJ8 Features
THREE TERMINAL VOLTAGE REFERENCE Analog IC
Peak Reflow Temperature: NOT SPECIFIED
REF02HJ8 Applications
There are a lot of Linear Technology/Analog Devices
REF02HJ8 Voltage Reference applications.
- PCMCIA cards
- Automotive
- 3 V/5 V, 8-bit to 12-bit data converters
- Precision data acquisition systems
- High resolution converters
- Industrial process control systems
- Precision instruments
- Notebook Computers
- Cell Phones
- Industrial Process Control
