DG384AAK/883B Overview

This electronic part is conveniently packaged in 16-CDIP (0.300, 7.62mm), making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tube is used. Mounted in Through Hole is this multiplexer. Multiplexers and demultiplexers have the same number of circuits 2:1. The operating temperature is extended to around -55°C~125°C TA. In total, 16 terminations have occurred. A 15V voltage supply should turn on and run the electronic component. Circuits based on DPST - NO switching are used to construct these analog switch ics. There are 2 circuits in this switch device. An switch multiplexer with 50Ohm internal resistance has a value of 50Ohm. The functions of 16 pins can be found in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 36V. 10V is the lowest voltage the electrical component should receive. A voltage higher than 500μA may cause damage to the switch multiplexer. Despite this switch's dual supply capability, its voltage should not exceed 18V. The voltage should be at least 5V if you are using dual power supplies. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. Operating voltages of 15V are compatible with the electrical part.

DG384AAK/883B Features

Switch Circuit: DPST - NO

DG384AAK/883B Applications

There are a lot of Maxim Integrated DG384AAK/883B Analog Switches & Multiplexers ICs applications.

• Cable PC
• Remote Powered Equipment
• Battery Powered Instruments
• Audio and video signal routing
• SONET
• ATM
• T1/E1 Terminals
• Audio and video routing
• Channel Banks
• Data Acquisition Systems