DG406DN+ Overview

Due to its 28-LCC (J-Lead) packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tube is used. Multiplexers like this are mounted in the Surface Mount position. The ratio between the number of multiplexer and demultiplexer circuits is 16:1. Around -40°C~85°C TA is the extended operating temperature. The total number of terminations is 28. High-quality output is provided by the electronic component's 16 channels. A 15V voltage supply should turn on and run the electronic component. There are 28 pins injected into the electronic part body. A total of 1 circuits make up this switch device. DG406 can be used to search for analog multiplexer variants. There is 175Ohm internal resistance in this digital multiplexer. To find out what the functions of 28 pins are, please refer to their datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 30V. Dual, Single supply type digital switch with a low cost. The lowest voltage fed to the electronic component should be 5V. This multiplexer would work with 500μA current. The analogue multiplexer may be damaged if voltage is greater than 500μA. For this switch, a dual supply voltage is feasible, but it must not exceed 20VIt is recommended that you attach at least 4.5V to your dual power supply. A voltage of 28V can be used to operate the electronic component. The electrical component supports 16 inputs.

DG406DN+ Features

16 Channels
500μA Supply Current

DG406DN+ Applications

There are a lot of Maxim Integrated DG406DN+ Analog Switches & Multiplexers ICs applications.

• Communication systems
• Public switching systems
• T1/E1 Terminals
• Battery Powered Instruments
• Voice over IP/DSL – Integrated Access Devices, Smart
• Mechanical reed relay replacement
• Communications systems
• SONET/SDH ADM
• New designs requiring multiplexer functions
• Fiber to the Home