DG409CUE+ Overview

Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. 4:1 is the ratio between multiplexers and demultiplexers. Operating temperature around 0°C~70°C TA extended. Totally, there are 16 terminations. A electrical component with 4 channels is capable of high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. It is injected into the electrical part body with 16 pins. These analog multiplexers are built based on SP4T switching circuits. This multiplexer is composed of 2 circuits. Try searching for DG409 variants of the analog switch ic. It has an internal resistance of 175Ohm. To find out what the 16 pins do, please refer to the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 30V. Dual, Single supply type digital switch with a low cost. It is recommended that the electrical component receives a voltage of 5V. 500μA current would be enough for this multiplexer to operate. For this multiplexer, dual supply voltage is feasible, but it should not exceed 20V. If you are using dual power supplies, you should attach at least 5V. The electrical part can be operated at 28V voltage levels.

DG409CUE+ Features

4 Channels
Switch Circuit: SP4T
500μA Supply Current

DG409CUE+ Applications

There are a lot of Maxim Integrated DG409CUE+ Analog Switches & Multiplexers ICs applications.

• PBXs
• Data switching
• Existing multiplexer applications (both fault-protected and nonfault-protected)
• Sample hold systems
• Ultrasound
• Precision instrumentation
• Avionics
• 65 V DACs
• Power routing
• Audio and video switching