DG412AK/883B Overview

Packed in 16-CDIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. The advanced packaging method Tube provides high reliability. It is mounted in the position Through Hole. Multiplexers and demultiplexers have the same number of circuits 1:1. Temperatures around -55°C~125°C TA are extended for operation. Total terminations are 16. Due to its 1 channels, the electrical component produces high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. The electronic part body is injected with 16 pins. Circuits based on SPST - NO switching are used to construct these analog switch ics. There are 4 circuits in this multiplexer. As far as internal resistance is concerned, it has 30Ohm. For functions related to 16 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. In a normalsituation, users should not supply the switches with voltage higher than 30V. Digital switch that provides Dual, Single power at a cost-effective price. The lowest voltage the electronic part should receive is 10V. The analogue multiplexer may be damaged if voltage is greater than 1μA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 20V. A dual power supply should have at least 4.5V voltage attached. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. There is a voltage range of 28V operating voltages for the electrical part.

DG412AK/883B Features

1 Channels
Switch Circuit: SPST - NO

DG412AK/883B Applications

There are a lot of Maxim Integrated DG412AK/883B Analog Switches & Multiplexers ICs applications.

• Communications systems
• High speed data transmission line cards
• Cross Connects
• Remote Powered Equipment
• Medical Instrumentation
• PCMCIA cards
• Microprocessor controlled systems
• Digital access cross connects
• PBXs
• Existing multiplexer applications (both fault-protected and nonfault-protected)