DS1086LU-222+ Overview

A clock integrated circuit is packaged in a Tube-shaped package because it is for use as a clock. Clock PLL is embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package. As a result, frequency synthesizers can be found to contain 8 terminations. Clock generator ics require a voltage of 3.3V. This clock generator receives its inputs from Clock, which is designed to be the clock source. Using 1 circuits, the electronic part's full performance can be accessed. The Surface Mount allows the electrical component to be installed conveniently on the panel. Keeping the supply voltage for this frequency synthesizer above 2.7V is recommended for safety reasons. There are 2.7V~3.6V available for use with this clock PLL. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. An electrical part such as this one can be classified as a Spread Spectrum Clock Generator component. These related electrical parts are available for the base part number DS1086L. Clock generator is designed with 8 pins. RF synthesizers can handle voltages up to 3.6V. There are a number of electronic parts in the EconOscillator? series, including this one. At frequencies of 66.6MHz, RF synthesizer achieves high efficiency. A loading capacitance of 15pF is capable of being delivered through it.

DS1086LU-222+ Features

Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.6V
Load capacitance of 15pF

DS1086LU-222+ Applications

There are a lot of Maxim Integrated DS1086LU-222+ Clock Generators applications.

• Antenna automatic tracking
• VSAT (Small Ground Satellite Station)
• CPUs
• Frequency shifting decodes
• Aerospace and defense
• Televisions
• Bluetooth receivers
• Time to digital converters
• Test equipment
• Picocells, femtocells and small cells