IH5041CPE Overview

The electrical component comes in 16-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Through Hole position. There is 1:1 ratio between the number of multiplexers and demultiplexers. An extended operating temperature of 0°C~70°C TA degrees Celsius. A total of 16 terminations have been recorded. The electronic part delivers high-quality output through its 1 channels. Turning on and running the electrical part should be easy with a 15V voltage supply. 16 pins are injected to the electronic part body. A SPST - NO switching circuit is used to build these analog multiplexers. There are 2 circuits in this multiplexer. IH5041 can be used to search for analog multiplexer variants. A 80Ohm internal resistance characterizes this multiplexer. For details about the functions of 16 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. In a normalsituation, users should not supply the switches with voltage higher than 18V. A cost-effective Dual supply type analogue multiplexer. 4.5V is the lowest voltage that should be fed to the electronic electronic part. Putting voltage greater than 10μA on the multiplexer may cause damage. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 18V. When using dual power supplies, you should attach at least 4.5V. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them.

IH5041CPE Features

1 Channels
Switch Circuit: SPST - NO

IH5041CPE Applications

There are a lot of Maxim Integrated IH5041CPE Analog Switches & Multiplexers ICs applications.

• Fiber to the Home
• Digital Cross-Connects
• Remote Powered Equipment
• PDH Multiplexers
• SDH/SONET multiplexers
• Automatic test equipment
• Audio signal routing
• Audio and video signal routing
• Avionics
• Digital access cross connects