MAX312EUE+ Overview

The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. 1:1 is the number of circuits in the multiplexer and demultiplexer. Temperatures around -40°C~85°C TA are extended for operation. There are 16 terminations totally. By its 1 channels, the electronic component provides high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. Based on SPST - NC switching circuits, these analog multiplexers work. A 4 circuit is present in this switch device. Use MAX312 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 10Ohm. To find out what the 16 pins do, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 20V should not normally be supplied to the switches. Analog switch ics with Dual, Single supply type are cost-effective. The lowest voltage fed to the electronic component should be 4.5V. If you put voltage higher than 100pA on the digital multiplexer, damage may occur. Despite this switch device's dual supply capability, its voltage should not exceed 20V. When using dual power supplies, you should attach at least 4.5V.

MAX312EUE+ Features

1 Channels
Switch Circuit: SPST - NC

MAX312EUE+ Applications

There are a lot of Maxim Integrated MAX312EUE+ Analog Switches & Multiplexers ICs applications.

• Multi-Line E1 Interface Cards
• Automotive applications
• Cell phones
• Low-Voltage
• Medical systems
• Avionics and Military Systems
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• High reliability control systems
• Central office
• SONET/SDH ADM