MAX320CPA+ Overview

The electronic part can be shipped overseas conveniently because it is packaged in 8-DIP (0.300, 7.62mm). In order to provide high reliability, an advanced packaging method Tube is used. There is an analog multiplexer mounted in position Through Hole. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around 0°C~70°C TA is the extended operating temperature. In total, there are 8 terminations. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. There are 8 pins injected into the electronic part body. The analog switch ics are built using SPST - NO switching circuits. A total of 2 circuits make up this switch device. Search with MAX320 if you are looking for analog multiplexer variants. It has an internal resistance of 35Ohm. The functions of 8 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Dual supply type digital switch with a low cost. In order to operate this switch device, it would need a current of 1μA. A digital multiplexer may suffer damage if voltage is applied above 125μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 8V. In the case of dual power supplies, you should connect at least 2.7V. There are SEPARATE OUTPUT outputs on this analog switch ic. There is a voltage range of 8V operating voltages for the electrical part.

MAX320CPA+ Features

1 Channels
Switch Circuit: SPST - NO
1μA Supply Current

MAX320CPA+ Applications

There are a lot of Maxim Integrated
MAX320CPA+ Analog Switches & Multiplexers ICs applications.

• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems