MAX322ESA+ Overview

The electronic part can be shipped overseas conveniently because it is packaged in 8-SOIC (0.154, 3.90mm Width). In order to provide high reliability, an advanced packaging method Tube is used. A switch device like this is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 1:1. Extended operating temperature around -40°C~85°C TA. In total, there have been 8 terminations. As a result of its 1 channels, this electronic component provides high-quality output. When the electronic component is given a voltage of 5V, it should be turned on and run. An electrical component like this is included in the 8 series. Based on SPST - NO/NC switching circuits, these analog multiplexers work. There are 2 circuits in this multiplexer. Try searching with MAX322 to find analog multiplexer variants. In this multiplexer, the internal resistance is 35Ohm. Please refer to the datasheets for 8 pins functions. It is a typical Multiplexer or Switches analog multiplexer. normally, users should not supply switches with voltages higher than 8V. Analog switch ics with Dual supply type are cost-effective. The lowest voltage fed to the electronic component should be 2.7V. For this digital switch to work, 1μA current would suffice. Putting voltage greater than 125μA on the multiplexer may cause damage. For this switch, a dual supply voltage is feasible, but it must not exceed 8VWhen using dual power supplies, you should attach at least 2.7V. There are SEPARATE OUTPUT outputs on this analog switch ic.

MAX322ESA+ Features

1 Channels
Switch Circuit: SPST - NO/NC
1μA Supply Current

MAX322ESA+ Applications

There are a lot of Maxim Integrated MAX322ESA+ Analog Switches & Multiplexers ICs applications.

• PDH Multiplexers
• SONET
• Mechanical reed relay replacement
• Microprocessor Controlled Analog Systems
• Optical Applications
• Audio and video routing
• Industrial
• Relay replacements
• Digital Cross-Connects
• Relay Replacement