MAX325CUA+ Overview

Packed in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), the electronic component is convenient for shipping overseas. High reliability is ensured by the advanced packaging method Tube. In Surface Mount, this analog switch is mounted. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Temperatures around 0°C~70°C TA are extended for operation. Total terminations are 8. The electronic part provides high-quality output because it has 1 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. A total of 8 pins are injected into the body of the electronic part. On the other hand, analog switches can be constructed using SPST - NO/NC switching circuits. The circuits in this analogue multiplexer number 2. Using the MAX325 search parameter, you can discover variants of the switch. Analog switches have 60Ohm internal resistance. The functions of 8 pins can be found in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 16V. An effective Single supply digital multiplexer. 2.7V is the lowest voltage the electrical component should receive. The switch device would be able to operate with 1μA current. Using only a single voltage supply, this analog switch requires 2.7V~16V voltage. It may damage the digital multiplexer if the voltage is higher than 1μA. This analog switch ic utilizes SEPARATE OUTPUT output.

MAX325CUA+ Features

1 Channels
Switch Circuit: SPST - NO/NC
1μA Supply Current

MAX325CUA+ Applications

There are a lot of Maxim Integrated MAX325CUA+ Analog Switches & Multiplexers ICs applications.

• Digital Cross-Connects
• Optical Applications
• Audio and video signal routing
• Precision test equipment
• Microwave transmission systems
• Intelligent PBX
• Medical systems
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Medical
• Cable PC