MAX326CSE+ Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.154, 3.90mm Width). This high-reliability packaging method uses advanced packaging methods Tube. Mounted in Surface Mount is this multiplexer. 1:1 is the number of circuits in the multiplexer and demultiplexer. An extended operating temperature of 0°C~70°C TA degrees Celsius. Totally, there are 16 terminations. A high-quality output is provided by the electrical component's 1 channels. With a 15V voltage supply, the electrical component should be turned on and run. A total of 16 pins are injected into the electrical part body. A SPST - NC switching circuit is used to build these analog multiplexers. A total of 4 circuits make up this switch device. Use MAX326 to search for variants of the digital switches. An switch multiplexer with 3.5kOhm internal resistance has a value of 3.5kOhm. You can find the functions of the 16 pins in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. A voltage higher than 30V should not normally be supplied to the switches. A cost-effective Dual, Single supply type analogue multiplexer. A low voltage of 10V should be applied to the electronic component. A digital multiplexer may suffer damage if voltage is applied above 90μA. If put voltage greater than 18V on the multiplexer, damage may be caused to the device. A dual power supply should have at least 4.5V voltage attached. There are SEPARATE OUTPUT outputs on this analog switch ic. This electrical part is compatible with 18V operating voltages.

MAX326CSE+ Features

1 Channels
Switch Circuit: SPST - NC

MAX326CSE+ Applications

There are a lot of Maxim Integrated MAX326CSE+ Analog Switches & Multiplexers ICs applications.

• Industrial
• Medical systems
• Precision data acquisition
• Routers
• Communication systems
• DVD-R
• Multiplexers
• Intelligent PBX
• Cell phones
• Cable PC