MAX328EPE+ Overview

This electronic part is conveniently packaged in 16-DIP (0.300, 7.62mm), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Through Hole. 8:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there have been 16 terminations. A 8 channel electronic part produces high-quality output. A 15V voltage supply should turn on and run the electronic component. An injection of 16 pins is performed into the body of the electrical component. 1 circuits are used in this analogue multiplexer. Try searching for MAX328 variants of the analog switch ic. Analog switches have 3.5kOhm internal resistance. To find out what the 16 pins do, please refer to the datasheets. Users should never supply a voltage higher than 30V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. There should be 10V voltage fed to the electrical part below 10V. It would be sufficient to run this analogue multiplexer with 4.5μA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 200μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 18V. The voltage should be at least 5V if you are using dual power supplies. Operating voltages of 28V are compatible with the electrical part.

MAX328EPE+ Features

8 Channels
4.5μA Supply Current

MAX328EPE+ Applications

There are a lot of Maxim Integrated
MAX328EPE+ Analog Switches & Multiplexers ICs applications.

• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems