MAX329CPE+ Overview

The electrical component comes in 16-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tube is used. In Through Hole, you'll find this switch device. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Operating temperature around 0°C~70°C TA extended. In total, 16 terminations have occurred. A electrical component with 2 channels is capable of high-quality output. When the electronic component is given a voltage of 15V, it should be turned on and run. Into the electrical component body are injected 16 pins. On the other hand, analog switches can be constructed using SP4T switching circuits. Look for analog switch ic variants by searching with MAX329. A 3.5kOhm internal resistance characterizes this multiplexer. The datasheets for the 16 pins explain the functions. An abnormal situation would be for the switch device to be supplied with a voltage greater than 30V. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended to use 10V as the lowest voltage for the electrical part. The analogue multiplexer could operate on 4.5μA current. For this switch, a dual supply voltage is feasible, but it must not exceed 18VFor dual power supplies, a voltage of at least 5V should be attached. This electrical part is compatible with 28V operating voltages.

MAX329CPE+ Features

2 Channels
Switch Circuit: SP4T
4.5μA Supply Current

MAX329CPE+ Applications

There are a lot of Maxim Integrated
MAX329CPE+ Analog Switches & Multiplexers ICs applications.

• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems
• Data Acquisition Systems
• Relay Replacement
• Battery Powered Systems
• Existing multiplexer applications (both fault-protected and nonfault-protected)