74LVC1G53DC-Q100H Overview

The electronic part can be shipped overseas conveniently because it is packaged in 8-VFSOP (0.091, 2.30mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. It is mounted in the position Surface Mount. 2:1 is the number of circuits in the multiplexer and demultiplexer. The operating temperature is extended to around -40°C~125°C TA. Total terminations are 8. Due to its 2 channels, the electrical component produces high-quality output. If the voltage supply is 3.3V volts, the electrical component should be turned on and run. A total of 8 pins are injected into the body of the electronic part. On the other hand, analog switches can be constructed using SPDT switching circuits. A total of 1 circuits make up this switch device. Try searching for the analog switch ic with 74LVC1G53 if you are looking for variants. Analog switches have 15Ohm internal resistance. For details about the functions of 8 pins, please refer to the datasheets. Multiplexers should not be powered above 5.5V in normal situations. Analogue multiplexers of the Single supply type that are cost-effective. The lowest voltage the electronic part should receive is 1.65V. 40μA current would be enough for this multiplexer to operate. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. Automotive, AEC-Q100 is a series number.

74LVC1G53DC-Q100H Features

2 Channels
Switch Circuit: SPDT
40μA Supply Current
-3db Bandwidth: 300MHz

74LVC1G53DC-Q100H Applications

There are a lot of Nexperia USA Inc. 74LVC1G53DC-Q100H Analog Switches & Multiplexers ICs applications.

• Microprocessor Controlled Analog Systems
• Audio and video signal routing
• Battery Powered Instruments
• PBXs
• High-Voltage
• Remote wireless modules
• Public switching systems
• Fiber In The Loop (FITL)
• Avionics
• PDAs