MAX337EWI+T Overview

Shipping overseas is convenient due to the electrical component's packing in 28-SOIC (0.295, 7.50mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have the same number of circuits 8:1. Operating temperature around -40°C~85°C TA extended. In total, there are 28 terminations. A 8 channel electronic part produces high-quality output. A 15V voltage supply should turn on and run the electronic component. An electrical component of this type can be found in the 28 series. A 2 circuit is present in this switch device. MAX337 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 400Ohm. In normalcircumstances, users should not exceed 30V volts for the multiplexer. The digital multiplexer has a low cost Dual, Single supply. There should be 4.5V voltage fed to the electrical part below 4.5V. 1μA current would be enough for this multiplexer to operate. If put voltage greater than 20V on the multiplexer, damage may be caused to the device. With dual power supplies, you should attach at least 4.5V. The electrical part can be operated at 28V voltage levels.

MAX337EWI+T Features

8 Channels
1μA Supply Current

MAX337EWI+T Applications

There are a lot of Maxim Integrated MAX337EWI+T Analog Switches & Multiplexers ICs applications.

• Digital access cross connects
• Low-Voltage
• Data switching
• Video switching
• CSU
• PDAs
• Remote Powered Equipment
• Frame Relay Equipment
• Modems
• Signal routing between systems