MAX354EPE+ Overview

As the electronic part is packed in 16-DIP (0.300, 7.62mm), international shipping is convenient. In order to provide high reliability, an advanced packaging method Tube is used. In Through Hole, this analog switch is mounted. 8:1 is the ratio between multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. Total terminations are 16. This electronic part offers high-quality output due to its 8 channels. An 15V voltage supply should allow the electrical part to be turned on and run. The electronic part body is injected with 16 pins. This multiplexer is composed of 1 circuits. Try searching with MAX354 if you're looking for variants. Internally, this switch multiplexer has a resistance of 350Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 36V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. It is recommended that the electrical component receives a voltage of 4.5V. An operating current of 300μA would be sufficient for this switch device. Despite this switch device's dual supply capability, its voltage should not exceed 18V. A dual power supply should have at least 4.5V voltage attached. 28V operating voltages can be used with this electrical part.

MAX354EPE+ Features

8 Channels
300μA Supply Current

MAX354EPE+ Applications

There are a lot of Maxim Integrated MAX354EPE+ Analog Switches & Multiplexers ICs applications.

• High reliability control systems
• High-Voltage
• USB 1.1 signal switching circuits
• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• Avionics test equipment
• DSUs
• Video signal routing
• Digital access cross connects
• Central office
• Imaging