MAX391CUE Overview

The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. High reliability is ensured by the advanced packaging method Tube. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. The operating temperature is extended to around 0°C~70°C TA. Total terminations are 16. A high-quality output is provided by the electrical component's 1 channels. When the electronic component is given a voltage of 5V, it should be turned on and run. The electrical component body receives 16 pins. These analog multiplexers are built based on SPST - NC switching circuits. A 4 circuit is present in this switch device. Try searching for the analog switch ic with MAX391 if you are looking for variants. It has an internal resistance of 35Ohm. Datasheets for 16 pin functions are available upon request. Theswitch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 15V. The digital multiplexer has a low cost Dual, Single supply. 3V is the lowest voltage that should be fed to the electronic electronic part. It would be sufficient to run this analogue multiplexer with 1μA current. There is no problem with using dual supply voltage, but it should not exceed 8V. The voltage should be at least 3V if you are using dual power supplies. The digital multiplexer has SEPARATE OUTPUT outputs that can be used.

MAX391CUE Features

1 Channels
Switch Circuit: SPST - NC
1μA Supply Current

MAX391CUE Applications

There are a lot of Maxim Integrated MAX391CUE Analog Switches & Multiplexers ICs applications.

• SONET
• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• E1 Multiplexer
• Relay Replacement
• Battery Powered Instruments
• Communications systems
• Data switching
• Medical Instrumentation
• Cross Connects
• Low-Voltage