130ns, 75ns SPST - NO 35Ohm Analog Switches BREAK-BEFORE-MAKE MAX392 16 Pins 100pA 5V 16-TSSOP (0.173, 4.40mm Width)
SOT-23
MAX392CUE+T Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
6 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
16-TSSOP (0.173, 4.40mm Width)
Number of Pins
16
Operating Temperature
0°C~70°C TA
Packaging
Tape & Reel (TR)
Published
2007
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
ECCN Code
EAR99
Resistance
35Ohm
Terminal Finish
Matte Tin (Sn)
Subcategory
Multiplexer or Switches
Max Power Dissipation
842mW
Technology
CMOS
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
4
Supply Voltage
5V
Terminal Pitch
0.65mm
Base Part Number
MAX392
Output
SEPARATE OUTPUT
Pin Count
16
Operating Supply Voltage
8V
Power Supplies
3.3/5/+-5V
Number of Channels
1
Number of Circuits
4
Max Supply Voltage
15V
Min Supply Voltage
3V
Operating Supply Current
1μA
Nominal Supply Current
1μA
Max Supply Current
1μA
Throw Configuration
SPST
Turn On Delay Time
125 ns
Voltage - Supply, Single/Dual (±)
3V~15V ±3V~8V
Supply Type
Dual, Single
Neg Supply Voltage-Nom (Vsup)
-5V
Turn-Off Delay Time
400 ns
Max Dual Supply Voltage
8V
On-State Resistance (Max)
35Ohm
Min Dual Supply Voltage
3V
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
72 dB
Current - Leakage (IS(off)) (Max)
100pA
Channel Capacitance (CS(off), CD(off))
9pF 9pF
On-state Resistance Match-Nom
0.3Ohm
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
130ns, 75ns
Charge Injection
2pC
Channel-to-Channel Matching (ΔRon)
300m Ω
Crosstalk
-85dB @ 1MHz
Switching
BREAK-BEFORE-MAKE
Switch-on Time-Max
130ns
Switch-off Time-Max
75ns
Normal Position
NC
Height Seated (Max)
1.1mm
Length
5mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Pricing & Ordering
Quantity
Unit Price
Ext. Price
2,500
$2.41250
$4.825
MAX392CUE+T Product Details
MAX392CUE+T Overview
Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Mounted in Surface Mount is this multiplexer. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operational temperature extended around 0°C~70°C TA. The total number of terminations is 16. A high-quality output is provided by the electrical component's 1 channels. Powered by a 5V voltage supply, the electrical part should be switched on and run. An electrical component like this is included in the 16 series. SPST - NO switching circuits are used in these analog switch ics. Circuits number 4 make up this analogue multiplexer. Try searching for the analog switch ic with MAX392 if you are looking for variants. It has an internal resistance of 35Ohm. You can find the functions of the 16 pins in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users shouldn't supply more than 15V voltage to the switch device. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 3V should be the lowest voltage fed to the electronic component. 1μA current would be enough for this multiplexer to operate. Putting voltage greater than 1μA on the multiplexer may cause damage. If put voltage greater than 8V on the multiplexer, damage may be caused to the device. You should attach at least 3V voltage if you are using dual power supply. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer. A voltage of 8V can be used to operate the electronic component.
MAX392CUE+T Features
1 Channels Switch Circuit: SPST - NO 1μA Supply Current
MAX392CUE+T Applications
There are a lot of Maxim Integrated MAX392CUE+T Analog Switches & Multiplexers ICs applications.