MAX397CAI+T Overview

Shipping overseas is convenient with the electronic component packed in 28-SSOP (0.209, 5.30mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have the same number of circuits 8:1. Temperatures around 0°C~70°C TA are extended for operation. In total, there are 28 terminations. Due to its 8 channels, the electrical component produces high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. An electrical component like this is included in the 28 series. A total of 2 circuits make up this switch device. Try searching with MAX397 if you're looking for variants. As far as internal resistance is concerned, it has 100Ohm. To find out what the functions of 28 pins are, please refer to their datasheets. Users should never supply a voltage higher than 16V to a switch device. Dual, Single supply type digital switch with a low cost. There should be 2.7V voltage fed to the electrical part below 2.7V. 1μA current would be enough for this multiplexer to operate. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 8V. In the case of dual power supplies, you should connect at least 3V. There is a voltage range of 15V operating voltages for the electrical part.

MAX397CAI+T Features

8 Channels
1μA Supply Current

MAX397CAI+T Applications

There are a lot of Maxim Integrated MAX397CAI+T Analog Switches & Multiplexers ICs applications.

• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• DSLAMs
• Industrial and process control systems
• CSU
• PBX interfaces
• Imaging
• High-Voltage
• Avionics and Military Systems
• Industrial
• Optical Applications