M74HCT4051TTR Overview

The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 8:1. Operating temperature around -55°C~125°C TA extended. Total terminations are 16. By its 8 channels, the electronic component provides high-quality output. An 4.5V voltage supply should allow the electrical part to be turned on and run. Electronic part bodies are injected with 16 pins. This multiplexer is composed of 1 circuits. Look for analog switch ic variants by searching with M74HCT405. Analog switches have 120Ohm internal resistance. Please refer to the datasheets for 16 pins functions. This switch device is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. A cost-effective Dual supply type analogue multiplexer. There should be 4.5V voltage fed to the electrical part below 4.5V. An operating current of 8μA would be sufficient for this switch device. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 6V. It is recommended that you attach at least 1V to your dual power supply. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board. There is a voltage range of 5V operating voltages for the electrical part. Operating 8 inputs is required. In 190MHz-bandwidths, data can be transferred.

M74HCT4051TTR Features

8 Channels
8μA Supply Current
Bandwidth: 190MHz

M74HCT4051TTR Applications

There are a lot of STMicroelectronics M74HCT4051TTR Analog Switches & Multiplexers ICs applications.

• SDH
• Medical systems
• Audio signal routing
• Signal routing between systems
• High reliability control systems
• ISDN NT1/TA
• Sample hold systems
• Avionics and Military Systems
• High-Voltage
• Digital Cross-Connects