110ns, 90ns SPST - NO 120Ohm Analog Switches BREAK-BEFORE-MAKE MAX4552 16 Pins 1nA 5V 16-SOIC (0.154, 3.90mm Width)
SOT-23
MAX4552ESE+T Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
16-SOIC (0.154, 3.90mm Width)
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
Published
1999
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
ECCN Code
EAR99
Resistance
120Ohm
Terminal Finish
Matte Tin (Sn)
Subcategory
Multiplexer or Switches
Max Power Dissipation
696mW
Technology
CMOS
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
4
Supply Voltage
5V
Terminal Pitch
1.27mm
Time@Peak Reflow Temperature-Max (s)
30
Base Part Number
MAX4552
Output
SEPARATE OUTPUT
Pin Count
16
JESD-30 Code
R-PDSO-G16
Operating Supply Voltage
5V
Number of Channels
1
Number of Circuits
4
Max Supply Voltage
12V
Min Supply Voltage
2V
Operating Supply Current
1μA
Nominal Supply Current
50nA
Max Supply Current
1μA
Throw Configuration
SPST
Turn On Delay Time
350 ns
Voltage - Supply, Single/Dual (±)
2V~12V ±2V~6V
Supply Type
Dual, Single
Neg Supply Voltage-Nom (Vsup)
-5V
Turn-Off Delay Time
250 ns
Max Dual Supply Voltage
6V
On-State Resistance (Max)
120Ohm
Min Dual Supply Voltage
2V
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
90 dB
Current - Leakage (IS(off)) (Max)
1nA
Channel Capacitance (CS(off), CD(off))
3.5pF 3pF
On-state Resistance Match-Nom
1Ohm
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
110ns, 90ns
Charge Injection
2pC
Channel-to-Channel Matching (ΔRon)
1 Ω
Crosstalk
-90dB @ 100kHz
Switching
BREAK-BEFORE-MAKE
Switch-on Time-Max
110ns
Switch-off Time-Max
90ns
Normal Position
NC
Height Seated (Max)
1.75mm
Length
9.9mm
Width
3.9mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
MAX4552ESE+T Product Details
MAX4552ESE+T Overview
Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Multiplexers like this are mounted in the Surface Mount position. Multiplexer and demultiplexer circuits have a number 1:1. The operating temperature is extended to around -40°C~85°C TA. Total terminations are 16. A high-quality output is provided by the electrical component's 1 channels. A 5V voltage supply should turn on and run the electronic component. A total of 16 pins are injected into the electrical part body. A SPST - NO switching circuit is used for these analog switches. 4 circuits are used in this analogue multiplexer. MAX4552 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 120Ohm. Multiplexer or Switches is a typical switch device. It is normally recommended that users do not supply the multiplexer with voltages higher than 12V. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended that the electrical component receives a voltage of 2V. In order to operate this switch device, it would need a current of 1μA. Putting voltage greater than 1μA on the multiplexer may cause damage. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 6V. If you are using dual power supplies, you should attach at least 2V. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. A voltage of 5V can be used to operate the electronic component.
MAX4552ESE+T Features
1 Channels Switch Circuit: SPST - NO 1μA Supply Current
MAX4552ESE+T Applications
There are a lot of Maxim Integrated MAX4552ESE+T Analog Switches & Multiplexers ICs applications.
Cell phones
Mechanical reed relay replacement
Optical Applications
Audio and video signal routing
Voice over IP/DSL – Integrated Access Devices, Smart