DG413LDQ-E3 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). In order to provide high reliability, an advanced packaging method Bulk is used. There is an analog multiplexer mounted in position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~85°C TA is the extended operating temperature. In total, there are 16 terminations. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. There are 16 pins injected into the electronic part body. The analog switch ics are built using SPST - NO/NC switching circuits. Search with DG413 if you are looking for analog multiplexer variants. It has an internal resistance of 50Ohm. The functions of 16 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 12V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. 2.7V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 1μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 6V. In the case of dual power supplies, you should connect at least 3V. There are SEPARATE OUTPUT outputs on this analog switch ic. There are 4 inputs to be operated.

DG413LDQ-E3 Features

1 Channels
Switch Circuit: SPST - NO/NC
1μA Supply Current
-3db Bandwidth: 280MHz

DG413LDQ-E3 Applications

There are a lot of Vishay Siliconix
DG413LDQ-E3 Analog Switches & Multiplexers ICs applications.

• Isolation
• Medical
• Imaging
• Ultrasound
• Audio and video switching
• Automatic test equipment
• Precision data acquisition
• Battery-powered systems
• Sample-and-hold systems
• Communication systems