Welcome to Hotenda.com Online Store!

logo
userjoin
Home

MAX4582LESE+T

MAX4582LESE+T

MAX4582LESE+T

Maxim Integrated

200ns, 100ns SP4T 80Ohm Analog Switches BREAK-BEFORE-MAKE MAX4582 16 Pins 2nA 5V 16-SOIC (0.154, 3.90mm Width)

SOT-23

MAX4582LESE+T Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2012
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 80Ohm
Terminal Finish Matte Tin (Sn)
Max Power Dissipation 696mW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number MAX4582
Pin Count 16
JESD-30 Code R-PDSO-G16
Operating Supply Voltage 12V
Number of Channels 4
Number of Circuits 2
Max Supply Voltage 12.6V
Min Supply Voltage 2V
Operating Supply Current 1μA
Propagation Delay 200 ns
Turn On Delay Time 200 ns
Logic Function Multiplexer
Supply Type Dual, Single
Supply Current-Max (Isup) 0.01mA
Neg Supply Voltage-Nom (Vsup) -5V
Turn-Off Delay Time 100 ns
On-State Resistance (Max) 80Ohm
Multiplexer/Demultiplexer Circuit 4:1
Off-state Isolation-Nom 73 dB
Current - Leakage (IS(off)) (Max) 2nA
Channel Capacitance (CS(off), CD(off)) 4pF 10pF
On-state Resistance Match-Nom 1Ohm
Switch Circuit SP4T
Switch Time (Ton, Toff) (Max) 200ns, 100ns
Charge Injection 0.5pC
Channel-to-Channel Matching (ΔRon) 1 Ω
Crosstalk -96dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+) 2V~12V
Height Seated (Max) 1.75mm
Length 9.9mm
Width 3.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
MAX4582LESE+T Product Details

MAX4582LESE+T Overview


As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 4:1. Operational temperature extended around -40°C~85°C TA. Total terminations are 16. A high-quality output is provided by the electrical component's 4 channels. An 5V voltage supply should allow the electrical part to be turned on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. These analog multiplexers are built based on SP4T switching circuits. A total of 2 circuits make up this switch device. Try searching with MAX4582 if you're looking for variants. It has an internal resistance of 80Ohm. normally, users should not supply switches with voltages higher than 12.6V. Dual, Single supply type digital switch with a low cost. A low voltage of 2V should be applied to the electronic component. This multiplexer would work with 1μA current. A voltage of 2V~12V is required for this switch device, which drains from a single voltage source. The electronic component can function from 12V.

MAX4582LESE+T Features


4 Channels
Switch Circuit: SP4T
1μA Supply Current

MAX4582LESE+T Applications


There are a lot of Maxim Integrated MAX4582LESE+T Analog Switches & Multiplexers ICs applications.

  • Remote Powered Equipment
  • Remote wireless modules
  • Multiplexers
  • Public switching systems
  • Video signal routing
  • Cellular phones
  • Channel Banks
  • DSUs
  • Private Branch Exchange (PBX)
  • RGB switches

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News