Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tube. A switch device like this is mounted in Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. Operational temperature extended around -40°C~85°C TA. In total, 16 terminations have occurred. By its 8 channels, the electronic component provides high-quality output. When a voltage supply of 5V is used, the electronic component should be turned on and run. A total of 16 pins are injected into the electrical part body. There are 1 circuits in this switch device. If you are looking for variants of the digital switch, trying search with DG408. Internally, this switch multiplexer has a resistance of 17Ohm. For details about the functions of 16 pins, please refer to the datasheets. Multiplexers should not be powered above 12V in normal situations. An effective Dual, Single supply digital multiplexer. In order for the electronic part to function properly, the lowest voltage should be 2.7V. The switch device would be able to operate with 700μA current. Put voltage above 500μA on the multiplexer to cause damage. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 6V. With dual power supplies, you should attach at least 3V. Don’t miss additional features of the electronic component such as: VIDEO APPLICATION. There is 30Ohm resistance between the Drain and Source on this part.
DG408LDY-E3 Features
8 Channels 700μA Supply Current Additional Features: VIDEO APPLICATION Drain-to-Source resistance: 30Ohm
DG408LDY-E3 Applications
There are a lot of Vishay Siliconix DG408LDY-E3 Analog Switches & Multiplexers ICs applications.
DSUs
Voice over IP/DSL – Integrated Access Devices, Smart