MAX6381XR43D1+T Overview
This power management consists of 3 mounting terminals on which it can be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels on this power managment ic that can be found in a series. In this PMIC, you can find SC-70, SOT-323 functions for your reference. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 1.8V. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Power management is included in the Surface Mount mount. A IC power such as this can be classified as a Power Management Circuits power management system. A total of 3 pins are located on this power management. This power management system has 3 pins. It is recommended that Vsup should not be less than 1V for this IC power. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. A Surface Mount mounting type is recommended. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 7μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using MAX6381, the base power ics number.
MAX6381XR43D1+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
7μA operating supply current
MAX6381XR43D1+T Applications
There are a lot of Maxim Integrated MAX6381XR43D1+T Voltage Supervisors applications.
- Transformer load monitoring equipment
- Automotive permanent magnet synchronous motors
- Rechargeable batteries
- Household appliances
- Sensitive sensors
- Power distribution systems of operating room
- DSP
- Power distribution systems of infant care room
- Multi-voltage system
- Insulation fault location system
