MAX6410BS43+T Overview

This voltage supervisor has a total of 4 mounting terminals that can be used for mounting. There is a Tape & Reel (TR)-packaging method applied to IC management. To assist you, this IC power includes 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. To assist you, this PMIC includes 4-WFBGA, CSPBGA functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. According to the specification, the package's peak reflow temperature is specified to be 260. IC management conducts in a 3V-voltage supply. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by Surface Mount. There are a total of 4 pins on power management. Power managment ic pin count is 4. A voltage (Vsup) that doesn't fall below 1.2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C. Power management has an output of Push-Pull, Totem Pole during operation. For this power management, there is an 1μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6410, which is the base power ics number.

MAX6410BS43+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
1μA operating supply current

MAX6410BS43+T Applications

There are a lot of Maxim Integrated MAX6410BS43+T Voltage Supervisors applications.

• FPGA design
• Detection of phase imbalance
• Radar
• Battery cars
• DC stabilized power supply module
• Stable power system
• Medical-specific insulation monitor
• Power distribution systems of infant care room
• Radio
• Analog circuit