MAX6865UK18D5L+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. This power ic is packaged in a way that looks like a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. Please refer to power management for SC-74A, SOT-753 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. During the reflow process, a peak temperature of 260 is specified for the package. IC management conducts at a voltage of 2.5V. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts power management on the wall. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 5 pins on power management. Pin count of the power management is 5. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The recommended mounting type is Surface Mount. You should set the supervisor's temperature during -40°C~85°C TA . When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. The supervisor's supply current is specified to 7μA. A similar IC managements number of the manufacturer can always be found by using MAX6865, the base power ics number.
MAX6865UK18D5L+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK18D5L+T Applications
There are a lot of Maxim Integrated MAX6865UK18D5L+T Voltage Supervisors applications.
- Low voltage/high power - AI, GPU
- Leakage current detection
- Insulation fault location system
- Cloud computing
- DVR
- Data storage applications
- Detection of phase imbalance
- Military electronics
- Radar
- Embedded computing
