MCP112T-450E/TT Overview

Power management is mounted through 3 terminals. This power ic is packaged in a way that looks like a Tape & Reel (TR). Power management is possible to find a series of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. IC management is packaged as a TO-236-3, SC-59, SOT-23-3 package. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by a Surface Mount-axis. Power Management Circuits is a subcategory of this PMIC chip. Taking into account all of the pins, this power management has a total of 3. The pins of the power management system count 3. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. There is a supply current of 1.75μA for the power management. A similar IC managements number of the manufacturer can always be found by using MCP112, the base power ics number. A maximum supply temperature of 1.75μA can be used with this power management.

MCP112T-450E/TT Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current

MCP112T-450E/TT Applications

There are a lot of Microchip Technology MCP112T-450E/TT Voltage Supervisors applications.

• Computer applications
• Detection of phase loss
• Multi-voltage system
• Refrigeration
• Digitally controlled LDO regulators circuit
• Linux and server computing
• Satellite navigation
• Kitchen appliances
• Urban rail transit weak current power monitoring
• Power distribution systems of CCU