MIC2589-2BM Overview

In the 14-SOIC (0.154, 3.90mm Width) package you will find it.Channel 1 is currently available.A Tube-shaped package holds it.Device DUAL is located at the terminal position.The device consists of a total of 14 pins.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller, Sequencer.A reliable operation requires the temperature to be set to -40°C~85°C.Apps for -48V are available on the device.A feature of Latched Fault describes it.Using a -80V~-19VV power source should be able to power the device.The MIC2589 family includes it.Despite its self-contained nature, Power Management Circuits is a very compact device.Hot-swappable device has Current Limit, Fault Timeout, OVP, UVLO programmable features.Presently, there is a sufficient supply of 4mA.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 19 V so that the device can function normally.Vsup is set to 80 V, the maximum supply voltage.Part 48 V is associated with power supplies.As you can see in this example, the gadget uses an analog IC called POWER SUPPLY SUPPORT CIRCUIT.The maximum supply current it requires to operate is 6 mA.Device --V has a maximum output.There is an electrical component in this series called --.

MIC2589-2BM Features

The terminal position of 14
Features of Latched Fault
Programmable features of Current Limit, Fault Timeout, OVP, UVLO
-- series

MIC2589-2BM Applications

There are a lot of Microchip Technology
MIC2589-2BM hot swap controllers applications.

• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies
• Central office switching systems