SY100EL35ZG-TR Overview

8-SOIC (0.154, 3.90mm Width)is the way it is packaged. The Tape & Reel (TR)package contains it. This output is configured with Differential. The trigger it is configured with uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A supply voltage of -4.2V~-5.5V is required for operation. Currently, the operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. In terms of FPGAs, it belongs to the 100EL series. A frequency of 2.2GHzshould be the maximum output frequency. A total of 1 elements are present. T flip flop consumes 32mA quiescent energy. This D latch belongs to the family of 100EL35. Electronic part Surface Mountis mounted in the way. This board is designed with 8pins on it. There is a clock edge trigger type of Positive Edgeon this device. This flip flop is designed with 1 Bits. There is a consumption of 32mAof quiescent current from it. The operating temperature should be lower than 85°C. It is recommended that the operating temperature is higher than -40°C. The minimal supply voltage is -4.2V. A maximum voltage of -5.5V can be provided by it. It is possible to achieve a frequency of 2.2GHz.

SY100EL35ZG-TR Features

Tape & Reel (TR) package
100EL series
8 pins
1 Bits

SY100EL35ZG-TR Applications

There are a lot of Microchip Technology SY100EL35ZG-TR Flip Flops applications.

• Consumer
• CMOS Process
• Convert a momentary switch to a toggle switch
• Buffered Clock
• Functionally equivalent to the MC10/100EL29
• Single Down Count-Control Line
• Power down protection
• Counters
• Frequency division
• Common Clocks