SN74LVC823ADWRE4 Overview

In the form of 24-SOIC (0.295, 7.50mm Width), it has been packaged. You can find it in the Tape & Reel (TR)package. There is a Tri-State, Non-Invertedoutput configured with it. This trigger uses the value Positive Edge. This electronic part is mounted in the way of Surface Mount. With a supply voltage of 1.65V~3.6V volts, it operates. A temperature of -40°C~85°C TAis considered to be the operating temperature. D-Typedescribes this flip flop. The FPGA belongs to the 74LVC series. In order for it to function properly, its output frequency should not exceed 150MHz. The element count is 1 . As a result, it consumes 10μA quiescent current and is not affected by external forces. Terminations are 24. JK flip flop belongs to 74LVC823 family. The power source is powered by 1.8V. A 5pFfarad input capacitance is provided by this T flip flop. It is a member of the LVC/LCX/Zfamily of D flip flop. A part of the electronic system is mounted in the way of Surface Mount. 24pins are included in its design. This device's clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The JK flip flop is with 3 output lines to operate. Additionally, it is characterized by WITH CLEAR AND CLOCK ENABLE.

SN74LVC823ADWRE4 Features

Tape & Reel (TR) package
74LVC series
24 pins

SN74LVC823ADWRE4 Applications

There are a lot of Texas Instruments SN74LVC823ADWRE4 Flip Flops applications.

• Control circuits
• Latch
• Differential Individual
• Event Detectors
• Automotive
• Reduced system switching noise
• Count Modes
• Balanced 24 mA output drivers
• Pattern generators
• Data storage