74AHC273D,118 Overview

As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). You can find it in the Tape & Reel (TR)package. There is a Non-Invertedoutput configured with it. This trigger uses the value Positive Edge. Surface Mountis positioned in the way of this electronic part. It operates with a supply voltage of 2V~5.5V. In the operating environment, the temperature is -40°C~125°C TA. Logic flip flops of this type are classified as D-Type. JK flip flop belongs to the 74AHCseries of FPGAs. Its output frequency should not exceed 110MHz. D latch consists of 1 elements. As a result, it consumes 4μA of quiescent current without being affected by external factors. Currently, there are 20 terminations. The 74AHC273family includes it. A voltage of 5V is used as the power supply for this D latch. Its input capacitance is 3pF farads. Devices in the AHCfamily are electronic devices. The electronic part is mounted in the way of Surface Mount. It is designed with 20 pins. This device has the clock edge trigger type of Positive Edge. It is designed with a number of bits of 8. For normal operation, the supply voltage (Vsup) should be kept above 2V. If high efficiency is desired, the supply voltage should be kept at 5V. This T flip flop features a maximum design flexibility due to its output current of 25mA. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.

74AHC273D,118 Features

Tape & Reel (TR) package
74AHC series
20 pins
8 Bits

74AHC273D,118 Applications

There are a lot of Nexperia USA Inc. 74AHC273D,118 Flip Flops applications.

• ESD protection
• Data Synchronizers
• Power down protection
• Bounce elimination switch
• Safety Clamp
• Supports Live Insertion
• Storage Registers
• QML qualified product
• Frequency Dividers
• Clock pulse