74AHCT273BQ-Q100X Overview

The package is in the form of 20-VFQFN Exposed Pad. As part of the package Tape & Reel (TR), it is embedded. Non-Invertedis the output configured for it. JK flip flop uses Positive Edgeas the trigger. Surface Mountis occupied by this electronic component. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. In the operating environment, the temperature is -40°C~125°C TA. The type of this D latch is D-Type. FPGAs belonging to the 74AHCTseries contain this type of chip. You should not exceed 75MHzin the output frequency of the device. D latch consists of 1 elements. Currently, there are 20 terminations. JK flip flop belongs to 74AHCT273 family. A voltage of 5V provides power to the D latch. This T flip flop has a capacitance of 3pF farads at the input. Electronic devices of this type belong to the AHCT/VHCT/VTfamily. It is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The supply voltage should be maintained at 5V for high efficiency. It consumes a total of 4μA quiescent current at any given time.

74AHCT273BQ-Q100X Features

Tape & Reel (TR) package
74AHCT series
20 pins

74AHCT273BQ-Q100X Applications

There are a lot of Nexperia USA Inc. 74AHCT273BQ-Q100X Flip Flops applications.

• ESD performance
• Storage registers
• Storage Registers
• Single Up Count-Control Line
• Matched Rise and Fall
• Guaranteed simultaneous switching noise level
• Buffered Clock
• Individual Asynchronous Resets
• Frequency Divider circuits
• Buffer registers