74AHCT374D-Q100J Overview

It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). You can find it in the Tape & Reel (TR)package. It is configured with Tri-Stateas an output. The trigger configured with it uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. The operating temperature is -40°C~125°C TA. A flip flop of this type is classified as a D-Type. This type of FPGA is a part of the Automotive, AEC-Q100, 74AHCT series. This D flip flop should not have a frequency greater than 130MHz. The list contains 1 elements. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The D flip flop is powered by a voltage of 5V . This JK flip flop has a 3pFfarad input capacitance. It belongs to the family of electronic devices known as AHCT/VHCT/VT. There is an electronic component mounted in the way of Surface Mount. A total of 20pins are provided on this board. This device exhibits a clock edge trigger type of Positive Edge. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. For high efficiency, the supply voltage should be set to 5V. There is 4μA quiescent current consumption by it.

74AHCT374D-Q100J Features

Tape & Reel (TR) package
Automotive, AEC-Q100, 74AHCT series
20 pins

74AHCT374D-Q100J Applications

There are a lot of Nexperia USA Inc. 74AHCT374D-Q100J Flip Flops applications.

• Set-reset capability
• Balanced 24 mA output drivers
• Buffer registers
• Automotive
• 2 – Bit synchronous counter
• Asynchronous counter
• Digital electronics systems
• Instrumentation
• ESD protection
• Functionally equivalent to the MC10/100EL29