74ALVCH16374DL,112 Overview

The item is packaged in 48-BSSOP (0.295, 7.50mm Width)cases. D flip flop is embedded in the Tube package. Tri-State, Non-Invertedis the output configured for it. The trigger it is configured with uses Positive Edge. Surface Mountis in the way of this electric part. Powered by a 1.2V~3.6Vvolt supply, it operates as follows. It is operating at -40°C~85°C TA. A flip flop of this type is classified as a D-Type. FPGAs belonging to the 74ALVCHseries contain this type of chip. In order for it to function properly, its output frequency should not exceed 350MHz. The element count is 2 . Despite external influences, it consumes 40μAof quiescent current. Currently, there are 48 terminations. If you search by 74ALVCH16374, you will find similar parts. The power source is powered by 3.3V. JK flip flop input capacitance is 5pF farads. Devices in the ALVC/VCX/Afamily are electronic devices. Surface Mount mounts this electronic component. A total of 48pins are provided on this board. A Positive Edgeclock edge trigger is used in this device. There are 16bits in this flip flop. As soon as 3.6Vis reached, Vsup reaches its maximum value. The D flip flop has no ports embedded. There are 8 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. There is a consumption of 200nAof quiescent current from it.

74ALVCH16374DL,112 Features

Tube package
74ALVCH series
48 pins
16 Bits

74ALVCH16374DL,112 Applications

There are a lot of Nexperia USA Inc. 74ALVCH16374DL,112 Flip Flops applications.

• 2 – Bit synchronous counter
• Safety Clamp
• ESCC
• Computing
• Functionally equivalent to the MC10/100EL29
• Circuit Design
• EMI reduction circuitry
• Instrumentation
• Event Detectors
• Shift Registers