74ALVT16823DL,512 Overview

In the form of 56-BSSOP (0.295, 7.50mm Width), it has been packaged. It is included in the package Tube. T flip flop uses Tri-State, Non-Invertedas the output. The trigger it is configured with uses Positive Edge. Surface Mountmounts this electrical part. The JK flip flop operates at a voltage of 2.3V~2.7V 3V~3.6V. In this case, the operating temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. The FPGA belongs to the 74ALVT series. Its output frequency should not exceed 250MHz Hz. There are 2 elements in it. As a result, it consumes 100μA quiescent current. In 56terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. It is a member of the 74ALVT16823 family. The power supply voltage is 2.5V. There is 3pF input capacitance for this T flip flop. The electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 56 pins. This device's clock edge trigger type is Positive Edge. It is designed with a number of bits of 18. The flip flop has 2embedded ports. It operates with 9 output lines. In terms of quiescent current, it consumes 3.9mA . Additionally, you may refer to the additional ALSO OPERATES FROM 3V TO 3.6V SUPPLY of the electronic flip flop.

74ALVT16823DL,512 Features

Tube package
74ALVT series
56 pins
18 Bits

74ALVT16823DL,512 Applications

There are a lot of Nexperia USA Inc. 74ALVT16823DL,512 Flip Flops applications.

• Memory
• Storage Registers
• Test & Measurement
• Matched Rise and Fall
• Load Control
• Clock pulse
• Registers
• Pattern generators
• Data transfer
• Latch