74HC273D-Q100J Overview

The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. D flip flop is included in the Tape & Reel (TR)package. T flip flop uses Non-Invertedas its output configuration. Positive Edgeis the trigger it is configured with. The electronic part is mounted in the way of Surface Mount. The supply voltage is set to 2V~6V. The operating temperature is -40°C~125°C TA. A flip flop of this type is classified as a D-Type. JK flip flop is a part of the 74HCseries of FPGAs. This D flip flop should not have a frequency greater than 122MHz. A total of 1elements are contained within it. There are 20 terminations,The 74HC273 family contains it. A voltage of 5V is used to power it. Input capacitance of this device is 3.5pF farads. A device of this type belongs to the family of HC/UH. It is mounted by the way of Surface Mount. As you can see from the design, it has pins with 20. In this device, the clock edge trigger type is Positive Edge. Flip flops designed with 8bits are used in this part. It reaches 6Vwhen the supply voltage is maximal (Vsup). It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. The supply voltage should be maintained at 5V for high efficiency. As of now, there are 8input lines. It consumes 8μA of quiescent current without being affected by external factors.

74HC273D-Q100J Features

Tape & Reel (TR) package
74HC series
20 pins
8 Bits

74HC273D-Q100J Applications

There are a lot of Nexperia USA Inc. 74HC273D-Q100J Flip Flops applications.

• Shift Registers
• Parallel data storage
• QML qualified product
• Counters
• Cold spare funcion
• Registers
• Modulo – n – counter
• Dynamic threshold performance
• Instrumentation
• Shift registers