74HCT273DB,118 Overview

20-SSOP (0.209, 5.30mm Width)is the way it is packaged. It is contained within the Tape & Reel (TR)package. Non-Invertedis the output configured for it. It is configured with a trigger that uses a value of Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates at 4.5V~5.5Vvolts. It is operating at a temperature of -40°C~125°C TA. This logic flip flop is classified as type D-Type. The 74HCTseries comprises this type of FPGA. There should be no greater frequency than 36MHzon its output. In total, it contains 1 elements. There are 20 terminations,It is a member of the 74HCT273 family. It is powered from a supply voltage of 5V. The input capacitance of this T flip flop is 3.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. In this case, the D flip flop belongs to the HCTfamily. There is an electronic part mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This flip flop is designed with 8 Bits. For high efficiency, the supply voltage should be set to 5V. It has 8lines. It consumes 8μA of quiescent current without being affected by external factors.

74HCT273DB,118 Features

Tape & Reel (TR) package
74HCT series
20 pins
8 Bits

74HCT273DB,118 Applications

There are a lot of Nexperia USA Inc. 74HCT273DB,118 Flip Flops applications.

• Automotive
• Circuit Design
• Storage Registers
• Balanced Propagation Delays
• Latch
• Bounce elimination switch
• Modulo – n – counter
• Load Control
• Matched Rise and Fall
• Asynchronous counter