74HC377DB,118 Overview

20-SSOP (0.209, 5.30mm Width)is the way it is packaged. Package Tape & Reel (TR)embeds it. The output it is configured with uses Non-Inverted. The trigger it is configured with uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. A voltage of 2V~6Vis used as the supply voltage. In this case, the operating temperature is -40°C~125°C TA. A flip flop of this type is classified as a D-Type. In this case, it is a type of FPGA belonging to the 74HC series. There should be no greater frequency than 83MHzon its output. A total of 1elements are present in it. 20terminations have occurred. This D latch belongs to the family of 74HC377. A voltage of 5V is used to power it. Its input capacitance is 3.5pF farads. Devices in the HC/UHfamily are electronic devices. A part of the electronic system is mounted in the way of Surface Mount. It is designed with 20 pins. This device has the clock edge trigger type of Positive Edge. It is designed with 8bits. Vsup reaches its maximum value at 6V. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. For high efficiency, the supply voltage should be set to 5V. This input has 8lines. Despite external influences, it consumes 8μAof quiescent current. As an additional reference, you may refer to electronic flip flop WITH HOLD MODE.

74HC377DB,118 Features

Tape & Reel (TR) package
74HC series
20 pins
8 Bits

74HC377DB,118 Applications

There are a lot of Nexperia USA Inc. 74HC377DB,118 Flip Flops applications.

• ESCC
• Latch
• Buffer registers
• Convert a momentary switch to a toggle switch
• Shift registers
• Frequency division
• Functionally equivalent to the MC10/100EL29
• Automotive
• Balanced 24 mA output drivers
• ESD protection