SN74AHC74D Overview

It is packaged in the way of 14-SOIC (0.154, 3.90mm Width). It is included in the package Tube. It is configured with Differentialas an output. In the configuration of the trigger, Positive Edgeis used. There is an electronic component mounted in the way of Surface Mount. The supply voltage is set to 2V~5.5V. It is at -40°C~125°C TAdegrees Celsius that the system is operating. It is an electronic flip flop with the type D-Type. It belongs to the 74AHCseries of FPGAs. It should not exceed 115MHzin terms of its output frequency. It consumes 2μA of quiescent current without being affected by external factors. There are 14 terminations,JK flip flop belongs to 74AHC74 family. A voltage of 3.3V is used as the power supply for this D latch. Its input capacitance is 2pF farads. The electronic device belongs to the AHC/VHC/H/U/Vfamily. In this case, the electronic component is mounted in the way of Surface Mount. As you can see from the design, it has pins with 14. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. It reaches the maximum supply voltage (Vsup) at 5.5V. Normal operation requires a supply voltage (Vsup) above 2V. As a result of its output current of 8mA, it is very flexible in terms of design. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It is reported that there are 2 channels.

SN74AHC74D Features

Tube package
74AHC series
14 pins

SN74AHC74D Applications

There are a lot of Texas Instruments SN74AHC74D Flip Flops applications.

• Data Synchronizers
• Count Modes
• Buffered Clock
• Consumer
• Power down protection
• Parallel data storage
• Storage Registers
• Supports Live Insertion
• Differential Individual
• Common Clocks