74HCT4051DB,112 Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SSOP (0.209, 5.30mm Width). High reliability is achieved by using advanced packaging method Tube. A switch device like this is mounted in Surface Mount. 8:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -40°C~125°C TA. A total of 16 terminations have been recorded. This electronic part offers high-quality output due to its 8 channels. With a 5V voltage supply, the electrical component should be turned on and run. It is injected into the electrical part body with 16 pins. The multiplexer consists of 1 circuits. Using the 74HCT4051 search parameter, you can discover variants of the switch. An switch multiplexer with 140Ohm internal resistance has a value of 140Ohm. For functions related to 16 pins, please refer to the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. The digital multiplexer has a low cost Dual, Single supply. It is recommended that the electrical component receives a voltage of 4.5V. For this multiplexer to operate, 16μA current would be sufficient. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 5V. If you are using dual power supplies, you should attach at least 1V. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. This electrical part is compatible with 5V operating voltages. A 180MHz-bandwidth can be used for data transfer.

74HCT4051DB,112 Features

8 Channels
16μA Supply Current
Bandwidth: 180MHz

74HCT4051DB,112 Applications

There are a lot of Nexperia USA Inc. 74HCT4051DB,112 Analog Switches & Multiplexers ICs applications.

• RGB switches
• Avionics test equipment
• Sample-and-hold systems
• Public switching systems
• Automotive applications
• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Precision data acquisition
• SONET/SDH ADM
• Low-Voltage
• Precision test equipment