74HCT4316DB,112 Overview

Shipping overseas is convenient due to the electrical component's packing in 16-SSOP (0.209, 5.30mm Width). High reliability is provided by advanced packaging method Tube. A switch device like this is mounted in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. The operating temperature is extended to around -40°C~125°C TA. 16 terminations have been made so far. The electronic part delivers high-quality output through its 1 channels. It is safe to turn on and run the electronic component with a 4.5V voltage supply. There are 16 pins injected into the electronic part body. Multiplexers built on a SPST - NO switching circuit are built. Use 74HCT4316 to search for variants of the digital switches. This digital multiplexer has 240Ohm internal resistance. You can find the functions of the 16 pins in the datasheets. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Analogue multiplexer with a Dual, Single supply type that is cost-effective. It is recommended that the electrical component receives a voltage of 4.5V. An operating current of 1nA would be sufficient for this switch device. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 5V. If you are using a dual power supply, you should attach at least 1V. Operating the 4 inputs requires 4 inputs.

74HCT4316DB,112 Features

1 Channels
Switch Circuit: SPST - NO
1nA Supply Current
-3db Bandwidth: 160MHz

74HCT4316DB,112 Applications

There are a lot of Nexperia USA Inc. 74HCT4316DB,112 Analog Switches & Multiplexers ICs applications.

• Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
• Microwave transmission systems
• Automatic test equipment
• Power routing
• Residential Gateways, Home Gateway/Router
• ISDN NT1/TA
• Communication systems
• Audio and video switching
• Audio and video signal routing
• High speed data transmission line cards