74HCT574D,652 Overview

It is embeded in 20-SOIC (0.295, 7.50mm Width) case. A package named Tubeincludes it. There is a Tri-State, Non-Invertedoutput configured with it. It is configured with a trigger that uses Positive Edge. The electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. The operating temperature is -40°C~125°C TA. The type of this D latch is D-Type. This type of FPGA is a part of the 74HCT series. Its output frequency should not exceed 76MHz. In total, it contains 1 elements. It consumes 8μA of quiescent current without being affected by external factors. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74HCT574 family contains it. A voltage of 5V is used as the power supply for this D latch. JK flip flop input capacitance is 3.5pF farads. In this case, the D flip flop belongs to the HCTfamily. As you can see from the design, it has pins with 20. As soon as 5.5Vis reached, Vsup reaches its maximum value. It is imperative that the supply voltage (Vsup) is maintained above 4.5Vin order to ensure normal operation. There are 2 ports embedded in the flip flops. With an output current of 7.8mA, it is possible to design the device in any way you want. It is also characterized by BROADSIDE VERSION OF 374.

74HCT574D,652 Features

Tube package
74HCT series
20 pins

74HCT574D,652 Applications

There are a lot of Nexperia USA Inc. 74HCT574D,652 Flip Flops applications.

• Divide a clock signal by 2 or 4
• ESD performance
• Shift registers
• Convert a momentary switch to a toggle switch
• Reduced system switching noise
• Balanced 24 mA output drivers
• Shift Registers
• Instrumentation
• Patented noise
• Asynchronous counter