74LVC574AT20-13 Overview

In the form of 20-TSSOP (0.173, 4.40mm Width), it has been packaged. As part of the package Tape & Reel (TR), it is embedded. T flip flop uses Non-Invertedas its output configuration. It is configured with a trigger that uses a value of Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 1.65V~3.6V volts. In the operating environment, the temperature is -40°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. In this case, it is a type of FPGA belonging to the 74LVC series. You should not exceed 125MHzin its output frequency. The list contains 1 elements. There have been 20 terminations. Power is supplied from a voltage of 1.8V volts. A 4pFfarad input capacitance is provided by this T flip flop. An electronic device belonging to the family LVC/LCX/Zcan be found here. There is an electronic part mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. This device has Positive Edgeas its clock edge trigger type. An electronic part designed with 8bits is used in this application. It reaches the maximum supply voltage (Vsup) at 3.6V. Its superior flexibility is attributed to its use of 2 circuits. The flip flop contains 2ports. In order for the chip to function, it has 8output lines. There is 10μA quiescent current consumption by it.

74LVC574AT20-13 Features

Tape & Reel (TR) package
74LVC series
20 pins
8 Bits

74LVC574AT20-13 Applications

There are a lot of Diodes Incorporated 74LVC574AT20-13 Flip Flops applications.

• Memory
• Control circuits
• QML qualified product
• Frequency Divider circuits
• Event Detectors
• Memory
• Matched Rise and Fall
• Convert a momentary switch to a toggle switch
• Common Clocks
• Latch