SN74ALS534ANSR Overview

The item is packaged in 20-SOIC (0.209, 5.30mm Width)cases. Package Tape & Reel (TR)embeds it. Currently, the output is configured to use Tri-State, Inverted. Positive Edgeis the trigger it is configured with. In this case, the electronic component is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. A temperature of 0°C~70°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. It belongs to the 74ALSseries of FPGAs. Its output frequency should not exceed 35MHz. The list contains 1 elements. During its operation, it consumes 19mA quiescent energy. There are 20 terminations,The object belongs to the 74ALS534 family. Power is provided by a 5V supply. An electronic device belonging to the family ALScan be found here. It is mounted in the way of Surface Mount. The 20pins are designed into the board. It has a clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. It is designed with a number of bits of 8. The superior flexibility of this product is achieved by using 8 circuits. A reliable performance of this D flip flop makes it well suited for use in TR. The power supply is 5V. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The supply voltage should be maintained at 5V for high efficiency. With an output current of 24mA, this device offers maximum design flexibility. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.

SN74ALS534ANSR Features

Tape & Reel (TR) package
74ALS series
20 pins
8 Bits
5V power supplies

SN74ALS534ANSR Applications

There are a lot of Texas Instruments SN74ALS534ANSR Flip Flops applications.

• Latch
• Safety Clamp
• Computers
• Set-reset capability
• Test & Measurement
• Pattern generators
• Digital electronics systems
• Data Synchronizers
• CMOS Process
• EMI reduction circuitry