74LVC16374ADL,112 Overview

48-BSSOP (0.295, 7.50mm Width)is the packaging method. D flip flop is included in the Tubepackage. The output it is configured with uses Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates at 1.65V~3.6Vvolts. Temperature is set to -40°C~125°C TA. The type of this D latch is D-Type. It belongs to the 74LVCseries of FPGAs. It should not exceed 300MHzin its output frequency. In total, it contains 2 elements. T flip flop consumes 20μA quiescent energy. There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74LVC16374 family contains this object. The power supply voltage is 2.7V. There is 5pF input capacitance for this T flip flop. In terms of electronic devices, this device belongs to the LVC/LCX/Zfamily of devices. The electronic part is mounted in the way of Surface Mount. As you can see from the design, it has pins with 48. Its clock edge trigger type is Positive Edge. An electronic part with 16bits has been designed. It reaches the maximum supply voltage (Vsup) at 3.6V. A total of 2ports are embedded in the D flip flop. To operate, the chip has a total of 8 output lines. There is 100nA quiescent current consumption by it.

74LVC16374ADL,112 Features

Tube package
74LVC series
48 pins
16 Bits

74LVC16374ADL,112 Applications

There are a lot of Nexperia USA Inc. 74LVC16374ADL,112 Flip Flops applications.

• Set-reset capability
• Divide a clock signal by 2 or 4
• Reduced system switching noise
• Latch
• Circuit Design
• Consumer
• Guaranteed simultaneous switching noise level
• Storage Registers
• Memory
• Convert a momentary switch to a toggle switch