MC74VHCT74ADR2G Overview

The flip flop is packaged in 14-SOIC (0.154, 3.90mm Width). It is included in the package Tape & Reel (TR). In the configuration, Differentialis used as the output. JK flip flop uses Positive Edgeas the trigger. It is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. -55°C~125°C TAis the operating temperature. The type of this D latch is D-Type. The 74VHCTseries comprises this type of FPGA. Its output frequency should not exceed 140MHz. This process consumes 2μA quiescents. A total of 14terminations have been recorded. Members of the 74VHCT74family make up this object. It is powered from a supply voltage of 5V. A 4pFfarad input capacitance is provided by this T flip flop. A device of this type belongs to the family of AHCT/VHCT/VT. It is mounted in the way of Surface Mount. This board has 14 pins. This device has the clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. It runs on 5Vvolts of power. In order to achieve high efficiency, the supply voltage should be maintained at 5V. The 8mA output current allows it to be designed with the greatest amount of flexibility. In order to operate, the chip has 1 output lines. It is reported that there are 2 channels.

MC74VHCT74ADR2G Features

Tape & Reel (TR) package
74VHCT series
14 pins
5V power supplies

MC74VHCT74ADR2G Applications

There are a lot of ON Semiconductor MC74VHCT74ADR2G Flip Flops applications.

• Frequency Dividers
• Power down protection
• CMOS Process
• Automotive
• 2 – Bit synchronous counter
• ESD performance
• Frequency Divider circuits
• Storage Registers
• Bus hold
• Count Modes